Serial Number:

85651725

Status:

Cancelled-Section 8

Filing Date:

06-14-2012

Registration Date:

02-12-2013

Mark Description:

The mark consists of generally a Silver Shield with an infinity symbol filling the upper half of the shield and a five pointed star beneath the infinity symbol centered on the shield. The Shield has five sides, two small, two long, and one medium. The Medium side provides the width of the shield and is the uppermost part of the shield. It is positioned horizontally and slightly curved downwards in the middle with the two ends slightly higher than the middle. The two small sides are a quarter the length of the Medium side, also bowed inwards similar to the medium side, and each connect at an equal but opposite downward 45 degree angle to the upward ends of the medium side to form a mirror image of each other. The long sides each connect to the available ends of the small sides, extend vertically downwards but immediately begin to curve towards the center while extending down until they meet at roughly a 135-degree angle. The two ends meet on the vertical axis positioned at the midway point of the medium side.A second line, paralleling the line forming the exterior of the shield, forms a second shield inside the first with a median separating the two lines. In the upper and wider portion of the shield lies an infinity symbol that stretches horizontally across the width of the shield inside the interior shield line. The symbol is made up of three designs, each fitting within the other. The normal infinity symbol of a horizontal figure eight is not used specifically, but the exterior shape of a horizontal figure eight makes up the basis for this symbol. The first and largest shape of the three is an outline of a figure eight, circular bulbs on the left and right merging together in the middle so that each bulb is open into the center. This figure delineates from a figure eight because the lines forming the center of a figure eight cross, but the lines used in this figure do not cross but instead leave a wide channel only about one fifth narrower than the circumference of the outer bulbs. This figure looks more like a capsule with rounded ends that has had its parallel sides squeezed towards each other. The second figure inside the squeezed capsule is a smaller version of the first, but with smaller outer bulbs and a longer, narrower channel between them as if the first figure had been made smaller and pulled apart slightly. This second figure has also been rotated clockwise so that the left bulb almost touches the inner top of the left bulb of the larger figure, leaving more space below, the right side is the same except the inner bulb rests close to the bottom of the outer bulb. The third figure continues the trend of the first two. It is smaller, the bulbs are farther apart, and the middle channel is so narrow that the connecting lines nearly touch. It too is rotated clockwise so that the left bulb is at the top portion of the middle bulb and the right small bulb is closer to the bottom of the right middle bulb. Beneath the infinity symbol is a five pointed star centered horizontally on the shield with two points of the star on the left, two points of the star on the right, and the fifth point projecting upwards centered on the vertical axis of the shield. The star has a line reaching from each angle change (points and intersections between tines) to the center of the star. The entire logo is colored in shades of grey and silver, darkened in places by black to enhance the 3D effect. Darker shading and black streaks from lower left to upper right across the upper left portion of the shield while light silver/grey streaks across the lower right of the shield. These streaks are broken by the infinity symbol and the star which have their own shading to bring relief to the art. Below the shield is the name of the company. The first word, "INFINITE", is in bold block letters, all caps, colored black except for the "F" which is colored silver, and streaked with shading of darker and lighter silver in the same fashion of the shield, it is tilted to the right (upper part shifted to the right as if italicized) and has a border as if raised from the page. It is larger than the following words and spans the width of the shield's width. The words, "WIRELESS SERVICES, LLC." are also in all caps but not in bold block. They are smaller and fit across the width of the first word on a single line.

Type of Mark:

Servicemark

Owner:

Abandon Date:

N/A

Correspondent Name: